Inside view of holoprojector cover poking thru
Date: 01/05/2007
Views: 4547
|
Outer dome on, and holoprojector housing poking thru
Date: 01/05/2007
Views: 4383
|
Look it fits - even gap all around.
Date: 01/01/2007
Views: 4827
|
Please mind the gap. ILM dome has the gap set at around 3/32. I'm pretty close.
Date: 01/01/2007
Views: 4784
|
Inner and Outer Dome sitting correct on the dome ring.
Date: 01/01/2007
Views: 4379
|
Dome Pies Removed to help with sanding/fitting
Date: 01/01/2007
Views: 4437
|
Top of the dome touching the pie edge fine, but there's a gap along the edge and bottom that needs fixing. More sanding.
Date: 01/01/2007
Views: 4321
|
Gap at bottom of pie wedge
Date: 01/01/2007
Views: 4370
|
I use a small/cheap mini hacksaw blade to cut the panels out. I knocked out the pins and wrapped it in duct-tape.
Date: 01/01/2007
Views: 4592
|
Inner Dome is touching all the way around. Which is good but still maybe holding up the lower pieces from touching.
Date: 01/01/2007
Views: 4543
|
R&J Dome Ring
Date: 12/29/2006
Views: 4209
|
This is a section of the R&J Dome Ring and how the wall thickness varies
Date: 12/31/2006
Views: 5607
|
Dremel Sander attachment used to grind down ring and dome
Date: 12/31/2006
Views: 5772
|
Sanding the Inner Dome
Date: 12/31/2006
Views: 5620
|
Sanding the Dome Ring
Date: 12/31/2006
Views: 5932
|
Inner dome now fits on ring, but doesn't go down all the way - but a good start
Date: 12/31/2006
Views: 5552
|
IMG_5925
Date: 05/19/2007
Views: 6161
|
Album: Dome Bumps / Switches
Date: 06/19/2007
Owner: chris
Size: 6 items
Views: 4969
|