Big milestone for me tonight. I finally got around to wiring up my dome periscope lift mech to a speed controller and my VexLabs RC setup.

This is my first time wiring up anything like this, so I was a bit apprehensive. The good news is I didn’t pop anything and it worked first time.

I was really surprised on how fast the little motor spun the mech up and down. So fast that the threaded rod squeals a bit. I may have to program in limits on the controller to cap the max speed.

Here’s a quick photo of the test setup and a video

For the test I used a SyRen10 Speed Controller.