Cutting Out Skins Quickly

I’ve been very busy the last few days and a bit tardy posting to the blog. However, I’ve made a lot of progress on the skins and legs, and will hopefully catch up with all the blog entries over the holiday weekend.

In the meantime here’s a quick tip for those of you cutting out your skins.

This may not be to everyone’s liking and my old my woodwork teacher would hate me for this, but I used a sharp wood chisel to punch out the pieces. I didn’t use a hammer or anything, I just had to push hard to break the tabs. Even on the super thin laser lines there was no marks left on the skin to speak of. I just lined up the chisel on the inside and pressed down on the little tabs.

I’d tried a bunch of different methods, from using a small saw blade on the wider cut-outs, to a Stanley knife on the thiner lines, I even tried a thin Dremel disc, but none worked as well or as quickly as the chisel. I found that the dremel would easily mark the skins or cut a wider undesirable lines and the knife blade would dull too quickly.

Cutting Skins

Posted by Chris on November 20th, 2007 in Body | 2 Comments

Tags: , , ,