It’s funny, I’ve been working on the new astromech.net website and DroidWiki all week and today used it myself for the first time to look something up.

Sadly I came up blank, but I don’t think it’s the fault of the wiki, but our part naming standards. I don’t think the blue surround that goes around the front vent surrounds has an official name. It’s kinda weird calling it the surrounds surround, but that’s what it is 🙂

My droids skins are removable, and the vents are attached to the inner-frame somewhat permanently. Getting the skins on and off with the blue surround permanently attached to the skins would be tricky, so I decided to kept the blue piece separate and use some magnets to hold it in place. I’m sure I saw the idea on someone else’s website, so I can’t take credit for it.

I carefully marked the optimum spot and glued the magnets on with epoxy

Using some tin snips I put some thin steel and made little tabs that would attached to the skins and allow the magnets to hold on

I attached them to the skins using CA glue

Here you can see the tabs just poking around the vent

And the blue surround in place

It’s not a perfect solution, and I’m a little worried it may pull off to easy. The tabs are also made from pretty thin steel, so the magnets don’t have a lot to attract to. At some point I’ll probably go back and add some thicker steel behind each to help the magnets grip better.

I could trim the surround a little and glue it permanently to the skins, but getting the skins on is hard enough and I’m not sure I want to take too remove that much material and like the tight fit.